About a month to go for our MGB, i’m not dare to announce my contributions actually, but its good to do so, at least i’ve a motivations to complete it.

what in mind was 1/32 rf5e and f-5e park side by side in 1 base, had been searching for resin conversion....pehhh....82 usd, i’m not dare to force my collector to buy ....by chance i had a plan to make it after 1/72 hawk nose 2 yers ago. So i felt .. this is the right times to start with it,

Started with the nose....






After basic shape done, i’d layer it with 1mm roll bondite, it save to make it slightly biger, because it will shrink in mold and casting process...


A lot more to go....will add some detail and finishing touch...


Thanks for viewing...wish me luck :D ....and C&C are welcome....

See u on next post...

Regards ;)
Naza

Hi Dremel,
Excellent work on the RF-5E nose. Looks like the kit part. Good job.

As usual up to yr high standards..........i before said tht rtfoe got a shrinking ray........u too have one is it...:)

p.s kalau nak commericalkan/sell that beautiful nose ...........pls put me down for 1 set.......chief

best
mr b

A nose job even MJ would have been proud of...okay, maybe not but that is one good piece of work. Keep it up!

akhirnya...:D

yup beautiful.. although i didnt do 32 scale.. this nosejob maybe i'll make an exception :lol:

more naza more.. :D

kuman

Brader Naza... I'm already in your list kan for this conversion set??? Dah order 2-3 tahun lepas... :D

Ah kembali lah dia.....much better nose job than MJ :lol:

Ni pun orang order ke?

BTW, you and me supose to go see En Badri....bila nko free?

amazing reproduction dremel...macam original...your silat Bondite really powerful... :D [I]

Mat Lobang,

Order 8 mai!!! Nak ganti idung kemek gue!!! Bila nak jumpa ni.....Landy dah sound??!!!

Sarjana Six Zero, out!!

Hee..Hee..

I got the 1/32 F-5E .. I will sokong also...

Yang ditunggu dah tiba. As usual, the masterpiece from sifu Naza is always great :lol: :lol: :lol: :lol: :lol:

I need one! I need one!!!!!!!!!!!!!!!!!!

wahhh great nose job bang :o

i have one 1/72 of this bird......compare to yours kecik kemetot jek :lol:

Naza,

Post this at ARC and you'll have international orders!

Sure ramai guling2 nak conversion kit.

Dear Dremel san,
Another great built Bro. Your conversion is a masterpiece.

Regards
TS. :D :lol: :D

Remind of a Tiger I seen before... :D

Somebody already produced this in the market in 1/32 & 1/48 scales.

IMHO, the Dangerous conversion set is only offered in 1/32 and the price, USD82 is really turned me off. Never manage to find the conversion in 1/48 scale right now.

bro, dulu hobbyhq ada pernah masuk 1/48 conversion untuk RF-5E
tak tau ada lagi ke tak

dulu tu tahun bila bro?I think what you mean is RF-5E conversion by Achtung model eh? At that time the Gaban & Suria Perkasa Hitam is way cooler than aircraft modelling for me.

What I want to stress in here is the conversion in 1/48 right now are not readily available.

The one sold by HHQ is low standard type and mold by hand. Not worth to continue. Please see the real thing below.

wow! nice.Any plan to bring it here mr Low? now we got Naza to cover the 1/32 conversion and the 1/48 modeller are being left alone..

Musang,

This is from taiwan, the build up is here.. dame nice..

RF-5E

indeed...

this is the first time i saw the conversion for 48 scale...
so HHQ any plan for this conversion :D

since now i already have the kit, decal & patche ready for TUDM RF-5E :lol:

kuman

We're trying all the time to get it in.

It'll take a lot of work to achieve what this guy from Taiwan achieved.

He has rescribed everything and added rivets to boot.

really nice conversion kit
me want one also
mr low, when will
this conversion kit will available

Guys, not to be a party pooper or pengawas but please do not hijack Dremel's thread. For info on the conversion please PM Mr. Low directly.

Now back to the schedule... :D :D :D

me waiting for Naza update to see how he make the glass for the nose...
learn new things.. :D

keep us updated ya naza.. :D

kuman

hah...korang akan demam f-5 pulak la lepas ni...ari tu dremel wat sukhoi...sume musm sukhoi...hehehe..alamt abis la musim f-16..pasni musim apelak? gripen?

From me:

Hidung tak mancung, pipi tersorong-sorong,
Dremel buat nose baru, ramai terpekik terlolong,
Apa guna kalau kita tak tolong,
Member buat satu, kita ramai-ramai order satu tong!!! :D

Jawab Mat Lobang jawab.....can't wait to see the final finish....

Sarjana Six Zero, out!!

twong, PoohBear, kuman, kay, KUK, azlandiver, TigerShark, f-4dablemodels, scud b,- thanks for viewing, supporting, encouraging, komenting etc....i’m really appreciate it....Happy Modeling guys... :)

Mr.B, druid_99, masterqq, musangpulut- I donno how its turn out...no promising bro...last time hawk pon camtu juga, tak sesuai utk jual...utk kegunaan sendiri shj, same as this, see how lah bro... :)

landyshah- yes bang utk collector saya, aircraft dia dpt...nose i punya...hahaha :D


xamel1975- hahaha....thread Viggen aku dh berapa bnyk comment, aku tak berani reply....hahaha....klu aku masuk yg ni....mcm2 soalan aku kena jawab bro....relax plan2 kayuh....i’m not think that far yet....aku buat semua nip on utk pactice, bnyk lagi aku kena belajar bro....

pemlow- thanks to high light the awesome product, wish i can reach the standard, btw I’ve less than 1 week to complete the nose and other parts, if i got 3 month, i dare to try, at least 20% formwhat that guy did...hahahah

razmanosaurex- amboi mulut....hahaha....i just try to give some colour to our hobby that all....enjoy bro enjoy....

Bud Bilko- bud....aku masih dlm perintah berkurung....bg aku 1-2 minggu, aku ngn bro landy akan landing gak jumpa hang....

Ni pa pasai pantun plak nih...kekekeke

Aku nak buat utk MGB
Saja nak bagi tambah entry
Tu baru RF aku post kat sini
Klu 1/32 F-5F nose aku tak tau apa nak jadi....hahahahaah

Thanks for a refrence bung bud.....hang punya dh ada dah...camna teruk pon kluar nti...adeiii

Some detailing was added this is the second stage after the previous shape 2 more stage to go,....will upload the final nose very2 soon....uhu

So far its look like this






alot of area to refine...aduhhh :(
thanks guys...tqvm....C&C Are welcome.....

Regards
Naza aka Dremel

Naza, camne aku leh terlepas thread nih...

ko memang hero la bro.... nose job, lip job, and so many jobs ( :lol: ) nko boleh buat

so yg ni master dia ke??? so far so good..... i guess we dont have to own a medical degree to perform plastic surgery....

Naza, for me takyah nak dapatkan sellable quality... asalkan ada sudah... tapi jangan kau pegi bagi aku seketul resin yang takde rupa langsung sudah... hahaha...

Serious ni... I'm willing to pay for this... :)

really nice surgery, looks like a real
master conversion, salute bro
bro druid 99 pun dah berkenan ni
so leh le buka tempahan ni bro

Naza,

Apa lagi, booking dah banyak tu. Lepas ni jenuh la nak layan tempahan pulak :P :P

Memang hebat la ko punya hasil tangan, rasa nak menitik ayaq mata bila tengok detail dia :lol: :lol: :lol: :lol:

Mat Lobang,

Ni jawapan aku:

F5F banyyyak marhain cari,
Bukan sekadar di Malaya,
Panjang dia bukan sekaki,
Kita market satu dunia!!!

Ada masalah ref.... habaq mai.... :D :D

Sarjana Six Zero, out!!

Bud Bilkohang -melawan bud???....pantun hang aku beli.... :lol:

ni dok prepare 3rd stage of RF-5E...
klu aku tertidoq aku update esok pagi....
aku skip 2 kali malam jumaat nak bagi jadi...
klu hang kata ok ,toksah RF-5F... 1/32 aermachi and hawk 208 kira aku berani.... :lol: :lol:


Silantra,druid_99,scud b,KUK- aku x berani janji apa2 lagi....dpt siap utk MGB09 pon aku dh syukur....klu turn out ok...y not kan...so wish me k :)


Naza aka Dremel

Aik...hang jawab!!! :D

Katak puru lari kengkang
Kaki sepit celah peti,
Bukan aku nak bangkang,
Hang buat ramai nanti beli......

I think we better stop this pantun....someone will tambah sampai esok tak habis. I'm okay if you're okay. Lets hit the bloody beaches!!

Sarjana Six Zero, out!!

Naza,
Get the master mold ready and get it manufactuere by a renowe company in Czech and we can hit international market standard.
I found out that the cost is not that expansive and no minimum quantity require. Of course, the more you produce the cheaper it is.
F-4able can produced Hornet's flare dispenser, so can you. Don;t waste your talent.
Regards
Low