Title: Patlabor Av-98 Ingram 2
Description: OOB for WOOB4
Description: OOB for WOOB4
KIRIN - January 16, 2009 06:35 AM (GMT)
Started another WIP for the this WOOB4
Snapfitting was done long time ago.
Some action post, :P I bought this kit cause of this shotgun. :D
You are under arrest!!!
The right hand/manipulator can be extend to grab the weapon.
The kit came with the figure of this Ingram 2 driver, Mr.Mikiyasu Shinshi
And his unit Captain, Ms.Kiichi Gotoh :lol:
Coming up next... some putty work. :wacko:
Snapfitting was done long time ago.
Some action post, :P I bought this kit cause of this shotgun. :D
You are under arrest!!!
The right hand/manipulator can be extend to grab the weapon.
The kit came with the figure of this Ingram 2 driver, Mr.Mikiyasu Shinshi
And his unit Captain, Ms.Kiichi Gotoh :lol:
Coming up next... some putty work. :wacko:
KIRIN - January 16, 2009 07:11 AM (GMT)
There are a sinkhole on each sid eof the chest, I cover it with polyester putty. Sanding works is coming up next when the putty fully cure.
It was an accident weeks ago, I spilled almost half bottle of Tamiya cement on my cutting map while this poor Patlabor was lying on it... Effected parts are recovering by using polyester putty again. :huh:
Some close shot for the part.
To be continued and as usual C&C are welcome. :D
It was an accident weeks ago, I spilled almost half bottle of Tamiya cement on my cutting map while this poor Patlabor was lying on it... Effected parts are recovering by using polyester putty again. :huh:
Some close shot for the part.
To be continued and as usual C&C are welcome. :D
KIRIN - January 30, 2009 01:27 PM (GMT)
Getting bored with cookies and card game, some little progress on my Patlabor.
I love this kit very much but the rubber in this kit really a problem, it cant be painted!!! To counter this problem, I wrap the rubber part with tissue paper.
Before attach the tissue paper to the rubber part, soak it in water. With a little bit care, move the tissue to the rubber part while it still wet, cover it nicely. Before the tissue paper dry, i spray a thin layer of dilluted white glue over it. Trim the part when its totally dry.
Here is the result.
Call me a lazy modeller. :D I planned to work on the right arm, tot can be done in one hour... end up, its 3 hours spended. :D
After the primer dry, I spray a black over the part.
The piston with Gunze Super Metalic chrome silver.
The rest of the part, I used normal Gunze silver.
This part will be cover by the rubber part, so i just ignore the seamline. ^_^
To be continued... C&C are welcomed. B)
I love this kit very much but the rubber in this kit really a problem, it cant be painted!!! To counter this problem, I wrap the rubber part with tissue paper.
Before attach the tissue paper to the rubber part, soak it in water. With a little bit care, move the tissue to the rubber part while it still wet, cover it nicely. Before the tissue paper dry, i spray a thin layer of dilluted white glue over it. Trim the part when its totally dry.
Here is the result.
Call me a lazy modeller. :D I planned to work on the right arm, tot can be done in one hour... end up, its 3 hours spended. :D
After the primer dry, I spray a black over the part.
The piston with Gunze Super Metalic chrome silver.
The rest of the part, I used normal Gunze silver.
This part will be cover by the rubber part, so i just ignore the seamline. ^_^
To be continued... C&C are welcomed. B)
KIRIN - January 30, 2009 01:43 PM (GMT)
After the silver paint dry, I cover it with Gunze Steel to create a metalic effect.
For the upper part of the piston, I used Tamiya Titanium Gold. A bit disappointed with the outcome, the gold color its too dull, should have use the Gaia color.
:bao_18:
This is how its look like when put everything together. The kit come with the red wire, I think it should be look better with yellow wires.:cold0wj:
Only some part can be seen after I attached the armour. >_<
Thats all for today, thanks for viewing.
For the upper part of the piston, I used Tamiya Titanium Gold. A bit disappointed with the outcome, the gold color its too dull, should have use the Gaia color.
:bao_18:
This is how its look like when put everything together. The kit come with the red wire, I think it should be look better with yellow wires.:cold0wj:
Only some part can be seen after I attached the armour. >_<
Thats all for today, thanks for viewing.